Download Resident Evil Requiem Hypervisor Bypass (KIRIGIRI) – complete installation guide with short and easy steps. Fix launch issues, bypass hypervisor errors, and run the game smoothly on Windows PC.

https://gamedrive.org/resident-evil-requiem-deluxe-edition-2026-all-dlc-v2/

CRACK FILES LIST:

• coldclient
• EfiGuard
• amd_ags_x64.dll
• amd_ags_x64.org
• ColdClientLoader.ini
• hyperevade.dll
• hyperhv.dll
• hyperkd.sys
• hyperlog.dll
• kdserial.dll
• KIRIGIRI.dll
• ReadMe.txt
• READNFO-MKDEV.TEAM.txt
• SimpleSvm.sys
• steamclient_loader_x64.exe
• watchdog.exe

Drop into your game folder: Resident Evil Requiem\

When prompted, click Replace / Yes to All.

===============================================================================

PART 1: BIOS PREPARATION – STEP BY STEP GUIDE

This section must be completed before installing the bypass. The steps are the same for most computers, but menu names may vary slightly depending on your motherboard manufacturer.

STEP 1: ENTER BIOS/UEFI

1. Save all your work and restart your computer.
2. As soon as the screen turns on, IMMEDIATELY start pressing the BIOS key repeatedly until the BIOS menu opens.
3. The correct key depends on your motherboard:
   – Most common: Del (Delete) or F2
   – Others: F1, F10, F12, or Esc
   – For HP: Often F10 or Esc
   – For Dell: Often F2 or F12
   – For Lenovo: Often F1 or F2

Tip: Watch the screen during startup – it usually shows “Press [KEY] to enter setup” for a few seconds.

STEP 2: SWITCH TO ADVANCED MODE (if needed)

1. When BIOS first opens, you may be in “EZ Mode” or “Simple Mode”.
2. Look for a button/key that says “Advanced Mode”, “Advanced”, or press F7.
3. This gives you access to all the settings we need to change.

STEP 3: LOCATE AND ENABLE VIRTUALIZATION

FOR AMD CPU USERS:

1. Look for these sections (names vary by motherboard):
   – “Advanced” → “CPU Configuration”
   – “Overclocking” → “CPU Features”
   – “AMD CBS” → “CPU Common Options”
2. Inside, find and ENABLE:
   – “SVM Mode” (most common name)
   – OR “AMD-V”
   – OR “Secure Virtual Machine Mode”
3. Set it to “Enabled”

FOR INTEL CPU USERS:

1. Look for these sections:
   – “Advanced” → “CPU Configuration”
   – “System Agent Configuration”
   – “Overclocking” → “CPU Features”
2. Inside, find and ENABLE:
   – “Intel Virtualization Technology” (most common name)
   – OR “VT-x”
   – OR “Virtualization Technology”
3. Set it to “Enabled”

STEP 4: LOCATE AND DISABLE SECURE BOOT

1. Look for these sections:
   – “Boot” tab/section
   – “Security” tab/section
   – “Authentication” tab
2. Inside, find:
   – “Secure Boot” (most common name)
   – OR “Secure Boot Mode”
   – OR “UEFI Secure Boot”
3. Set it to “Disabled”.

Note: On some systems (especially Windows 11 pre-built PCs), you may need to:
– First set “Secure Boot Mode” to “Custom”
– Then you can disable it
– Or you may need to set “OS Type” to “Other OS” or “Legacy”

STEP 5: SAVE AND EXIT

1. Press the key for “Save and Exit” (usually F10).
2. A confirmation window will appear asking if you want to save changes.
3. Select “Yes” or “OK”.
4. Your computer will restart automatically with the new settings.

COMMON BIOS NAVIGATION TIPS:

• Use arrow keys to move between menus
• Use + and – keys to change values
• Use Enter to select or open submenus
• Look for the legend (usually on the right side or bottom) showing which keys do what
• If you get lost, look for the “Exit” tab and select “Exit Without Saving” to restart

IF YOU CANNOT FIND THE SETTINGS:

• Check the motherboard manual (physical or online)
• Search online for “[Your motherboard model] enable virtualization”
• Search online for “[Your computer brand/model] disable secure boot”

===============================================================================

PART 2: WINDOWS CONFIGURATION

1. Open Command Prompt as Administrator:

• Press Windows Key + X
• Select “Windows Terminal (Admin)” or “Command Prompt (Admin)”

Run these commands one by one:

• bcdedit /set hypervisorlaunchtype off
• bcdedit /set testsigning on
• bcdedit /set nointegritychecks on

PART 3: WINDOWS DEFENDER CONFIGURATION (OPTIONAL BUT RECOMMENDED)

1. Open Windows Security (search in Start Menu)
2. Go to “Device security” → “Core isolation details”
3. Ensure ALL these are OFF:

• Memory integrity
• Kernel-mode Hardware-enforced Stack Protection
• Local Security Authority protection
• Microsoft Vulnerable Driver Blocklist

NOW PLAY RUN: steamclient_loader_x64.exe

===============================================================================

TROUBLESHOOTING

If game doesn’t launch or you get errors:

• Reboot
• Try running EfiGuard first (in the EfiGuard folder)
• For Intel users: This driver is experimental, BSODs are possible

Q1 : A hypervisor feature is not available to the user.

sc start denuvo
[SC] StartService FAILED 3224698910:
A hypervisor feature is not available to the user.

Download: https://torrent.cybar.to/Y2024/3/FIX_Hypervisor.zip

run _RunFix.bat try to run steamclient_loader_x64.exe again

===============================================================================

NOTES

• The service name “denuvo” can be changed to anything you want, just be consistent
• If you use spaces in paths or service names, you must wrap them in quotes
• The Intel driver (hyperkd.sys) is less stable than AMD’s SimpleSvm.sys
• Keep all crack files in your game folder – they’re needed to launch
• EfiGuard can be used as an alternative to disabling Secure Boot/VBS features

===============================================================================