Download Resident Evil Requiem Hypervisor Bypass (KIRIGIRI) – complete installation guide with short and easy steps. Fix launch issues, bypass hypervisor errors, and run the game smoothly on Windows PC.

https://gamedrive.org/resident-evil-requiem-deluxe-edition-2026-all-dlc-v2-01/

Full Game download: https://gamedrive.org/resident-evil-requiem-deluxe-edition-2026-all-dlc-v2-01/

If you have issues, check the Troubleshooting section below.

CRACK FILES LIST:

• coldclient
• EfiGuard
• amd_ags_x64.dll
• amd_ags_x64.org
• ColdClientLoader.ini
• hyperevade.dll
• hyperhv.dll
• hyperkd.sys
• hyperlog.dll
• kdserial.dll
• KIRIGIRI.dll
• ReadMe.txt
• READNFO-MKDEV.TEAM.txt
• SimpleSvm.sys
• steamclient_loader_x64.exe
• watchdog.exe

Drop into your game folder: Resident Evil Requiem\

When prompted, click Replace / Yes to All.

Download Crack from: https://gamedrive.org/resident-evil-requiem-deluxe-edition-2026-all-dlc-v2/

If you have issues, check the Troubleshooting section below.

===============================================================================

Important: Backup BitLocker Key Before Disabling Secure Boot

If your guide requires turning Secure Boot OFF, users must backup their BitLocker recovery key first.

When Secure Boot is disabled, Windows may trigger BitLocker recovery mode on next boot. If the recovery key is not backed up, the system can get locked.

METHOD 1: USB/HDD BOOT WITH EFIGUARD (RECOMMENDED)

If you have issues, check the Troubleshooting section below.

⭐ Use this method if Method 2 doesn’t work. This is the most reliable method!

Note: The EfiGuard included in this crack already has Secure Boot support built-in!

QUICK STEPS OVERVIEW

1. ✅ Enable SVM (AMD) / VT-x (Intel) in BIOS
2. ✅ Turn off Secure Boot in BIOS
3. ✅ Copy EfiGuard files to a formatted USB stick OR create 200MB FAT32 partition on HDD
4. ✅ Copy all crack files from kirigi-hypervisor.rar into your game directory
5. ✅ Reboot and boot into your USB drive or HDD partition
6. ✅ Run steamclient_loader_x64.exe from game folder
7. ✅ Configure Windows Defender exclusions to prevent file deletion

DETAILED STEP-BY-STEP GUIDE

STEP 1: BIOS CONFIGURATION

1. Enter BIOS/UEFI (press Del, F2, F10, or Esc during startup).
2. Enable Virtualization:
3. For AMD: Enable SVM Mode or AMD-V
4. For Intel: Enable VT-x or Intel Virtualization Technology
5. Disable Secure Boot:
6. Navigate to Boot or Security tab
7. Find Secure Boot and set to Disabled
8. Save and Exit (press F10 and confirm Yes).

PART 2 : WINDOWS CONFIGURATION

Open Command Prompt as Administrator:

• Press Windows Key + X
• Select “Windows Terminal (Admin)” or “Command Prompt (Admin)”

Run these commands one by one:

• bcdedit /set hypervisorlaunchtype off
• bcdedit /set testsigning on
• bcdedit /set nointegritychecks on

IMPORTANT: After running these commands, REBOOT your computer for Test Signing mode to activate.

STEP 2: PREPARE BOOTABLE MEDIA (CHOOSE ONE OPTION)

OPTION A: USING A USB DRIVE

1. Format a USB stick to FAT32 (right-click USB drive → Format → choose FAT32).
2. Navigate to your game folder (Resident Evil Requiem\).
3. Open the EfiGuard folder.
4. Copy the following contents to the root of your formatted USB stick:
5. The EFI folder
6. EfiDSEFix.exe
7. EfiGuard.rar (optional, but recommended)

OPTION B: USING A 200MB FAT32 PARTITION ON HDD/SSD (BEST METHOD)

This is the recommended “set it and forget it” solution. Once created, you can keep the files there permanently.

1. Open Disk Management:
2. Right-click Start button (or press Windows Key + X)
3. Select “Disk Management”
4. Shrink an existing partition:
5. Right-click on a partition with free space (like C: drive)
6. Select “Shrink Volume”
7. Enter 200 MB (or 250MB to be safe)
8. Click “Shrink”
9. Create a new partition:
10. Right-click on the new unallocated space
11. Select “New Simple Volume”
12. Follow the wizard:
13. Assign any available drive letter (E:, F:, etc.)
14. IMPORTANT: Choose “FAT32” as the file system
15. Set volume label to “EFIGUARD”
16. Complete the wizard
17. Copy EfiGuard files:
18. Navigate to your game folder (Resident Evil Requiem\)
19. Open the EfiGuard folder
20. Copy the following to your new FAT32 partition:
21. The EFI folder
22. EfiDSEFix.exe
23. EfiGuard.rar (optional)

STEP 3: INSTALL CRACK FILES

1. Extract kirigi-hypervisor.rar to a temporary folder.
2. Copy ALL files and folders from the extracted crack into your game directory (Resident Evil Requiem\):
3. coldclient folder
4. EfiGuard folder
5. All .dll files (amd_ags_x64.dll, hyperevade.dll, KIRIGIRI.dll, etc.)
6. .sys files (SimpleSvm.sys, hyperkd.sys)
7. steamclient_loader_x64.exe
8. watchdog.exe and all other files
9. When prompted, click Replace or Yes to All.

STEP 4: BOOT FROM THE MEDIA

1. Restart your computer with the USB inserted (if using USB).
2. Enter BIOS (press Del, F2, etc.) OR use the Boot Menu key (often F8, F11, F12).
3. Select your boot device:
4. For USB: Select your USB drive from the boot menu
5. For HDD partition: Look for “UEFI: FAT32 Partition” or your drive model with the new partition
6. Your computer will boot from the media and launch EfiGuard, which temporarily disables driver signature enforcement. Works even with Secure Boot enabled!

STEP 5: LAUNCH THE GAME

1. Once EfiGuard has loaded, your system will continue booting or show a command-line interface. Keep the USB inserted (if using USB).
2. Navigate to your game installation folder (Resident Evil Requiem\) using File Explorer.
3. Run the game using steamclient_loader_x64.exe [Run as Administrator].

STEP 6: WINDOWS DEFENDER CONFIGURATION

IMPORTANT: Do this before or immediately after installing crack files!

Add Folder Exclusions

1. Open Windows Security → Virus & threat protection → Manage settings.
2. Scroll to Exclusions → Add or remove exclusions.
3. Click Add an exclusion → Folder.
4. Select your Resident Evil Requiem game folder.
5. If using USB method, also add exclusion for your USB drive.

Restore Any Deleted Files

1. In Windows Security, go to Protection history.
2. Find quarantined crack files (.dll, .sys, .exe).
3. Click each and select Restore.

PRO TIP

Using a 200MB FAT32 partition on your main drive is the best method. It’s always there when you need it, you can’t lose it, and you just need to select it from the boot menu whenever you want to play. After booting into Windows normally, the partition remains available for future use.

===============================================================================

METHOD 2: STANDARD KIRIGIRI BYPASS

If you have issues, check the Troubleshooting section below.

Use this method first. It works for most users.

PART 1: BIOS PREPARATION – STEP BY STEP GUIDE

This section must be completed before installing the bypass. The steps are the same for most computers, but menu names may vary slightly depending on your motherboard manufacturer.

STEP 1: ENTER BIOS/UEFI

1. Save all your work and restart your computer.
2. As soon as the screen turns on, IMMEDIATELY start pressing the BIOS key repeatedly until the BIOS menu opens.
3. The correct key depends on your motherboard:
   – Most common: Del (Delete) or F2
   – Others: F1, F10, F12, or Esc
   – For HP: Often F10 or Esc
   – For Dell: Often F2 or F12
   – For Lenovo: Often F1 or F2

Tip: Watch the screen during startup – it usually shows “Press [KEY] to enter setup” for a few seconds.

STEP 2: SWITCH TO ADVANCED MODE (if needed)

1. When BIOS first opens, you may be in “EZ Mode” or “Simple Mode”.
2. Look for a button/key that says “Advanced Mode”, “Advanced”, or press F7.
3. This gives you access to all the settings we need to change.

STEP 3: LOCATE AND ENABLE VIRTUALIZATION

FOR AMD CPU USERS:

1. Look for these sections (names vary by motherboard):
   – “Advanced” → “CPU Configuration”
   – “Overclocking” → “CPU Features”
   – “AMD CBS” → “CPU Common Options”
2. Inside, find and ENABLE:
   – “SVM Mode” (most common name)
   – OR “AMD-V”
   – OR “Secure Virtual Machine Mode”
3. Set it to “Enabled”

FOR INTEL CPU USERS:

1. Look for these sections:
   – “Advanced” → “CPU Configuration”
   – “System Agent Configuration”
   – “Overclocking” → “CPU Features”
2. Inside, find and ENABLE:
   – “Intel Virtualization Technology” (most common name)
   – OR “VT-x”
   – OR “Virtualization Technology”
3. Set it to “Enabled”
4. Download the Tool: You can try manually downloading InSpectre.exe from the official Gibson Research Corporation website: https://torrent.cybar.to/Y2024/3/InSpectre.exe
5. Run the Tool: After downloading, run InSpectre.exe as Administrator. It will show you the current status of Meltdown and Spectre mitigations on your system.
6. Click “Disable Spectre Protections” in InSpectre.exe, then restart.
7. Verification: After restarting, you can run InSpectre.exe again to confirm the mitigations are now disabled.

STEP 4: LOCATE AND DISABLE SECURE BOOT

1. Look for these sections:
   – “Boot” tab/section
   – “Security” tab/section
   – “Authentication” tab
2. Inside, find:
   – “Secure Boot” (most common name)
   – OR “Secure Boot Mode”
   – OR “UEFI Secure Boot”
3. Set it to “Disabled”.

Note: On some systems (especially Windows 11 pre-built PCs), you may need to:
– First set “Secure Boot Mode” to “Custom”
– Then you can disable it
– Or you may need to set “OS Type” to “Other OS” or “Legacy”

STEP 5: SAVE AND EXIT

1. Press the key for “Save and Exit” (usually F10).
2. A confirmation window will appear asking if you want to save changes.
3. Select “Yes” or “OK”.
4. Your computer will restart automatically with the new settings.

COMMON BIOS NAVIGATION TIPS:

• Use arrow keys to move between menus
• Use + and – keys to change values
• Use Enter to select or open submenus
• Look for the legend (usually on the right side or bottom) showing which keys do what
• If you get lost, look for the “Exit” tab and select “Exit Without Saving” to restart

IF YOU CANNOT FIND THE SETTINGS:

• Check the motherboard manual (physical or online)
• Search online for “[Your motherboard model] enable virtualization”
• Search online for “[Your computer brand/model] disable secure boot”

===============================================================================

PART 2: WINDOWS CONFIGURATION

1. Open Command Prompt as Administrator:

• Press Windows Key + X
• Select “Windows Terminal (Admin)” or “Command Prompt (Admin)”

Run these commands one by one:

• bcdedit /set hypervisorlaunchtype off
• bcdedit /set testsigning on
• bcdedit /set nointegritychecks on

IMPORTANT: After running these commands, REBOOT your computer for Test Signing mode to activate.

===============================================================================

PART 3: WINDOWS DEFENDER CONFIGURATION

Windows Defender WILL delete crack files if not configured properly!

Add Exclusions (Do this first)

1. Open Windows Security (search in Start Menu).
2. Go to Virus & threat protection → Manage settings.
3. Scroll down to Exclusions and click Add or remove exclusions.
4. Click Add an exclusion → Folder.
5. Browse and select your Resident Evil Requiem game folder.

Core Isolation (Optional but Recommended)

1. Go to “Device security” → “Core isolation details”
2. Ensure ALL these are OFF:

• Memory integrity
• Kernel-mode Hardware-enforced Stack Protection
• Local Security Authority protection
• Microsoft Vulnerable Driver Blocklist

Note: Changes to Core Isolation require a reboot to take effect.

Restore Deleted Files (If Defender already deleted them)

1. In Windows Security, go to Virus & threat protection.
2. Click Protection history.
3. Look for items that were quarantined (usually .dll or .sys files).
4. Click on each item and select Restore.
5. Add exclusions FIRST before running the game again.

NOW RUN THE GAME:

steamclient_loader_x64.exe [Run as Administrator]

===============================================================================

TROUBLESHOOTING GUIDE

This guide covers common issues related to launching the game, bypass errors, and system configurations. Please follow the steps in the order they are presented for each specific problem.

1. General Launch Issues

If the game doesn’t launch or you encounter errors:

• Restart Your Computer: This is the most basic and often effective first step. Reboot and try launching the game again.
• Antivirus / Windows Defender:
  • Your security software may have quarantined or deleted necessary game files.
  • Action: Check your antivirus history (especially Windows Defender). Restore any missing or deleted files and add the entire game folder to the exclusions list.
• Verify BIOS/UEFI Settings:
  • Virtualization Technology (SVM/VT-x): Ensure this is Enabled. This is required for the bypass to function.
  • Secure Boot: This must be Disabled in your BIOS.
  • Note: Access BIOS by pressing Del, F2, or F12 during startup.
• USB Drive / Partition (for Method 2): If you are using a bootable method, ensure your USB drive or specific partition is formatted as FAT32.
• Intel Users (Experimental Driver): Be aware that the driver used in this bypass is experimental. Blue Screens of Death (BSODs) are possible. Save your work before attempting to run the game.

---

2. “Hypervisor Feature Not Available” Error

sc start denuvo
[SC] StartService FAILED 3224698910:
A hypervisor feature is not available to the user.

This error indicates that Windows is not allowing the necessary driver to run. Try the following solutions in order:

Fix 1: Automated Fix Script

1. Download the automated fix package:
   https://torrent.cybar.to/Y2024/3/FIX_Hypervisor.zip
2. Extract the contents of the ZIP file.
3. Right-click on _RunFix.bat and select “Run as administrator”.
4. After the script completes, try running the game again using steamclient_loader_x64.exe.

Fix 2: Hypervisor Launcher Tool [AMD USERS ONLY]

If the automated script doesn’t work, use this dedicated launcher tool:

1. Download the Hypervisor Launcher:
2. https://torrent.cybar.to/Y2024/3/HypervisorLauncher.rar
3. Extract the RAR file (you may need WinRAR or 7-Zip).
4. Move the extracted files into your main game folder (where steamclient_loader_x64.exe is located).
5. Right-click on HypervisorManager.exe and select “Run as administrator”.
6. In the Hypervisor Manager window, click “Install Hypervisor”.
7. When prompted, browse to your game folder and select the driver file:
8. Resident Evil Requiem/SimpleSvm.sys (or navigate to the appropriate path where this file is located).
9. After installation, click “Start Service” in the Hypervisor Manager.
10. Finally, right-click on steamclient_loader_x64.exe and select “Run as administrator” to launch the game.

---

3. “Insufficient Resource” Errors

This error can occur when the system doesn’t have the correct debug settings enabled.

1. Open a Command Prompt or Terminal window as Administrator (right-click on Start menu → select “Windows Terminal (Admin)” or “Command Prompt (Admin)”).
2. Type or paste the following command and press Enter:
   bcdedit /debug on
3. If you see a message about a debug transport, also run this command:
   bcdedit /dbgsettings local
4. Reboot your computer for the changes to take effect.

---

4. How to Remove the “Test Mode” Watermark

After enabling the bypass, you may see a “Test Mode” watermark in the bottom-right corner of your screen. You can remove it without disabling Test Mode itself.

1. Download Universal Watermark Disabler from this link:
   https://torrent.cybar.to/Y2024/3/uwd.zip
2. Extract the ZIP file.
3. Right-click the extracted file and select “Run as administrator”.
4. In the application window, click the “Install” button.
5. Restart your computer when prompted.

Note: This tool does not modify system files and works on Windows 7, 8, 8.1, 10, and 11. It only hides the watermark; “Test Mode” will remain active in the background, which is required for the bypass to work.

---

Quick Reference Summary

Problem	Likely Solution
Game won’t start	Restart PC, check antivirus, verify BIOS settings
Hypervisor error	Run FIX_Hypervisor.bat or use HypervisorLauncher
Insufficient Resource error	Enable debug mode with bcdedit /debug on
“Test Mode” watermark	Use Universal Watermark Disabler
Method 2 doesn’t boot	Ensure USB/partition is FAT32

===============================================================================

NOTES

• The service name “denuvo” can be changed to anything you want, just be consistent
• If you use spaces in paths or service names, you must wrap them in quotes
• The Intel driver (hyperkd.sys) is less stable than AMD’s SimpleSvm.sys
• Keep all crack files in your game folder – they’re needed to launch
• EfiGuard can be used as an alternative to disabling Secure Boot/VBS features

===============================================================================